GoodVitality
By Commercial Science
Colloidal Silver Maker with Timer
Click here to buy
This colloidal silver maker has a current limited 37v output. This higher voltage will mean that the colloidal silver is produced faster. This is especially important if you are going to make the yellow coloured colloidal silver
The most common problem experienced by our customers whilst making golden colloidal silver is forgetting to turn off their colloidal silver maker.
Our new colloidal silver maker, model T3, solves this problem. It contains a built in timing device which can run from 2 to 20 minutes (approx). Now all you have to do is select the time interval you want and switch on. The yellow indicator lamp will light up. When the selected time has elapsed the yellow indicator lamp goes off. The green lamp remains on to show the device is still switched on.
This unit increases the out voltage from 27v to 33v which is achieved using one PP3 battery and some clever electronics. We have also incorporated a low battery warning lamp so you know when to change the battery.
The new T3 machine also comes with double size silver electrodes (80mm) which offers two advantages; the electrodes are twice as long and will produce twice as much colloidal silver. Secondly, because the electrodes are remote from the machine, the water can be heated to greater temperatures without risking any damage to your electronics.
Specifications:-
Voltage output: 0 and +33 volts approx.
All devices outputs tested by laboratory oscilloscope.
Battery Requirements:-
One 9 volt PP3 battery which is included.
Electrodes:-
Pure silver electrodes (80mm) for silver making which are included